Analyze The Reasons for The Easy Failure of The Crusher Conv
Posted by Animall Feed Blok Making Machine | updatetime 2021-12-10 13:55
Analyze the reasons for the easy failure of the crusher conveyor belt: as a common equipment for feed processing, the feed crusher is prone to failure, and most of the reasons for the failure are caused by improper operation during the use of the feed crusher.
1. Too much material is fed by the machine, resulting in incomplete pulverization of the material and surplus. Residual materials accumulate in the pulverizer and cause relative movement between the material and the belt and wear the conveyor belt;
2. There are too many tree branches with bark in the materials crushed by the user. These tree branches with bark are damaged by the relative movement of the tree branches and the belt because the feeding roller cannot be fed into the designated cutting position reasonably. belt. In addition, the foundation under the driving roller of the conveying assembly is a flat solid ground. If too much wood chips accumulate, the belt will be torn.
Water drop crusher
Specific solutions to the above-mentioned failures: 1. The feed amount of the feed grinder is operated according to the specified load, and it should not be blindly greedy; 2. If the material with bark is crushed, it is recommended to feed it into the feeding port from the root or remove it. After the bark is crushed; 3. If the ground under the driving roller is level and solid, the foundation should be opened according to the installation diagram of the water drop crusher to prevent material accumulation.
Products
Related Posts
Leave your comment Here